Fohhn MA-4.600

  • BỘ KHUẾCH ĐẠI CHUYÊN NGHIỆP
  • Loại sản phẩm : Khuếch đại 4 kênh
  • kênh đầu vào: 4
  • đầu ra bộ khuếch đại: 4
  • Công nghệ mạch : Class D
  • Công suất đầu ra 4Ω :  4 x 600W
  • Công suất đầu ra 8Ω :  4 x 300W
  • trở kháng tối thiểu: 4 ohm
Mã: MA-4.600 Danh mục: Từ khóa:
Hỏi thông tin Yêu cầu báo giá

Note Service Dapro

Quý khách đăng ký đại lý kinh doanh xin vui lòng điền thông tin trong mục yêu cầu báo giá. Chúng tôi sẽ phản hồi trong thời gian sớm nhất.

Địa điểm phân phối
Yêu cầu bảo hành

Fohhn MA-4.600 is a compact 4-channel digital amplifier with a 4 × 4 routing matrix. It is ideal for smaller and medium-sized projects and it’s extremely flexible and cost effective. It can be easily integrated into media controls and is effortlessly configured with the Fohhn Audio Soft via a USB-C socket.

Main features

  • Output power: 4 × 600 W / 4 ohms / 100 V / 70 V
  • Available in two variants: With Analog Inputs (MA-4.600 ANA) or Dante Input (MA-4.600 DAN)
  • Compact and light: 1 U, 5.2 kg
  • Mounting brackets for rack included
  • Two freely programmable switching contacts
  • With Fohhn Airea connection
  • Can be remotely operated and controlled over Fohhn Net
  • Q-SYS Plugin available in combination with Fohhn NA-4 or ABX-6
  • Temperature controlled, low noise fan
  • Auto Power Save for minimum standby power requirements
  • Fohhn speaker presets ensure maximum safety, reliability and excellent sound quality

Technical data

Physical features

  • dimensions (w × h × d): 1 U / 19″, 440 × 45 × 370 mm
  • weight: 5.2 kg

—————————————————————————————————

Electronic features

  • amplifier technology: Class D
  • amplifier outputs: 4
  • DSP routing (matrix): 4 × 4
  • frequency response: 20 Hz – 20 kHz
  • signal/noise ratio: > 103 dB/A
  • THD+N: 0,15% (1 kHz, 8 ohms, 3 dB below clipping)
  • dynamic range: > 120 dB
  • password protection: yes
  • auto power save: adjustable from 1 s to 12 h, or never active
  • protective circuit: over voltage protection, over current protection, over temperature protection, short-circuit protection, DC protection, power on delay, soft start and inrush current limit
  • power supply: 100 – 240 V AC 50/60 Hz, universal power supply with Power Factor Correction (PFC)
  • power consumption: maximum 700 W, idle state 35 W, Auto Power Save 2 W, standby 2 W
  • heat dissipation: max. 120 W, 410 BTU/h, 104 kcal/h
  • temperature range: 0 – 40 °C
  • cooling: temperature-controlled fan
  • output power: 4 × 600 W / 4 ohms / 100 V / 70 V, 4 × 300 W / 8 ohms (1 kHz, THD+N <1 %)
  • minimum impedance: 4 ohms
  • input channels: 4

—————————————————————————————————

Controller

  • digital signal processors: 1
  • independent limiters: 20
  • FIR filter: yes
  • input gain: -80 dB – +12 dB
  • routing gain: -80 dB – +12 dB
  • output gain:n -80 dB – +12 dB
  • EQ: 8 × 10 fully parametric filters, gain +/-12 dB, frequency 10 Hz – 20 kHz, Q 0.1 – 100
  • selective 3-band limiting: bass / mid / high
  • limiter / compressor: 8
  • noise gate: 8
  • delay: 4 × 0 – 145 ms (0 – 50 m) outputs, 4 × 0 – 30 ms (0 – 10 m) inputs
  • X-over: 8 × Linkwitz/Riley 4th order, 24dB/oktave, highpass 10 Hz – 20 kHz, lowpass 10 Hz – 20 kHz
  • user presets: 100
  • speaker presets: 100
  • system latency: 1.2 ms
  • band-specific time constants: yes
  • filter technology: 80-bit double precision
  • input: Analog or DANTE 32 kHz – 96 kHz, 16/24 bit, AES/EBU
  • input DSP processing: yes

—————————————————————————————————

Remote control and remote monitoring

  • remote control: Fohhn Net over RS-485, Fohhn Audio Soft, USB-C
  • remote monitoring: temperature, protect, signals, power supply, Fohhn Net, Fohhn Audio Soft
  • switching contact: load preset, standby on / off

—————————————————————————————————

Display (front)

  • ready LED: blue = power on, blue flashing = sign
  • protect LED: red = error / protect / standby
  • USB Config LED: blue = host, remote control over USB

—————————————————————————————————

Connections and controls

  • mains connection: 1 × C14 IEC socket
  • switching contact 1 and 2: 1 × Phoenix 3-pin
  • Airea Net: 1 × RJ45
  • outputs: 1 × Phoenix 8-pin, max. 3.3 mm² flexibel, 3.3 mm² rigid
  • USB Config: 1 × USB-C socket

—————————————————————————————————

Display (rear)

  • receive / send LED: remote control, Fohhn Net

—————————————————————————————————

Input interface analog

  • inputs: 4 × analog
  • signal inputs: analog, max. signal +18 dBu, phantompower (24 V DC) switchable
  • THD: < 0,005 % typ. < 0,003 % 1 kHz 0 dBu
  • S/N ratio: > 108 dB/A
  • latency: 1,0 ms
  • frequency response: 20 Hz – 20 kHz
  • input impedance: 10 kOhms